Comments on: Wooster Brush R232-9 Epoxy Glide Roller Cover, 1/4-Inch Nap, 9-Inch

By: J. Wagner

J. Wagner — Thu, 09 Jan 2025 00:39:16 +0000

Used for polyaspartic and epoxy coatings.
Work very well. Never had a problem with lint or knapp coming off in the coatings. Does a nice job of holding the thick coating. Only downside is that it introduces a lot of bubbles in polyaspartic. Going more slowly helps a lot, but time is important when spreading catalytic coatings. Mix smaller batches and take your time when using these, or have more help on hand to evenly spread your coatings with these rollers.

By: Z

Thu, 09 Jan 2025 00:39:16 +0000

Used it with Kilz decorative concrete paint
Worked like a charm and never dried out (sealed it in a shopping bag between uses). Amazing product!

By: Matthew Mazzuckelli

Matthew Mazzuckelli — Thu, 09 Jan 2025 00:39:16 +0000

Not bad for the price
These worked great with a 2 part epoxy we used to paint an indoor grow room. The shorter nap isn’t ideal for textured or rougher surfaces but these did great on finished sheetrock. Bear in mind epoxy doesn’t spread like paint, so you will need a sturdy roller, but these covers get the job done.

By: Blix

Blix — Thu, 09 Jan 2025 00:39:16 +0000

Works with MAS epoxy
I cut it in half with a hacksaw to use on a 4 inch roller. I used it with MAS epoxy and it worked great! It held up fine without shedding or falling apart.

By: Cody

Cody — Thu, 09 Jan 2025 00:39:16 +0000

Epoxy Floor Roller
Made for epoxy paint and topcoat application, short fibers stay intact. No worries!

By: Brett

Brett — Thu, 09 Jan 2025 00:39:16 +0000

Good product
Worked great on epoxy floor.

By: T S Andersen

T S Andersen — Thu, 09 Jan 2025 00:39:16 +0000

Great product worked exceptionally well
I epoxied my floors last week. In everything I read and saw on You Tube the customers complained about the rollers in the Rust Oleum Rock Solid package falling apart. I bought four of these rollers because I was doing a large area nearly 1000 square feet. I ended up using only one roller to do my job and the roller still looked great at the end of the job. No pieces were left behind in the epoxy, I couldn’t be happier. Since the rollers came in a package of two, I sent one package back even though it had only cost about $3. I have enough clutter around here. The only downside is that it took nearly two weeks for the product to arrive so order early.

By: jim

jim — Thu, 09 Jan 2025 00:39:16 +0000

Could be useful
I thought I would need durable roller cover for spreading my 2-part epoxy. The kit came with a roller cover that worked well for project. I suppose if the job was bigger that this cover may last longer. Never was able to test. It sits on my shelf with all my other painting supplies now.

By: Patricio milla

Patricio milla — Thu, 09 Jan 2025 00:39:16 +0000

the epoxy roller do the job very well, easy and clean, good product but for home used only.

By: Fernando Marquez

Fernando Marquez — Thu, 09 Jan 2025 00:39:16 +0000

De muy mal gusto que solo se pueda comprar de 1 pieza