A1484 Battery Replacement for iPad 5th 6th 7th 8th Generation (Model: A1474 A1475 A1476 A1822 A1823 A1893 A1954 A2197 A2198 A2200 A2270 A2428 A2429 A2430), for iPad 5 6 7 8 Air 1, not for Mini/Pro

GO SLOW!! ESPEC where the cables are..
The battery is great! Came 60% charged. Kit comes with every thing you need to perform the job EXCEPT heating element. YOU DO NOT NEED ANYTHING SPECIAL. A HAIRDRYER works just fine. IN FACT I would think preferable?So I’ll start by saying this is not for the faint hearted or ppl with shaky hands for whatever reason. For me, I was fully prepared to lose it.WHAT IT DOESNT COME WITH ARE DIRECTIONS or any explanation about what tools are or when u will need them..There are TONS of YT vids but I found F.I.W vid with 3.03ksubs and 133k views. It explains it thoroughly and shows intensive step by step. While the pad worked on was way newer than mine it was virtually same steps.WATCH ALL THE WAY THROUGH b4 attempting to fix.It is VERY CRITICAL that u do not cut through the digitizer (screen) connectors. They are very brittle from the years of heat from use and may break regardless upon opening. Honestly in hindsight I would just order replacement screen at same time. [Very cheap AND the one I got Came with better tweezers lol (by fixcracked)The home button doesn’t support touch id if thats a big deal to you u can swap with your old one I guess]Anyway I subd a slew of pics and you can see where I’m holding the brittle digitizer screen cable connector that I broke while cutting through adhesive although I think it was pretty much snapped and why my iPad kept shutting off..but I digress.The 3 things to know..1. Hairdryer works awesom-ly. Best way I found was to hold it at medium heat about 1-1.5 in away and don’t heat all up at once. Heat a side thoroughly then break seal. Heat next side then continue etc. You can heat all then do the individual sides also.2. Do everything but the bottom right corner (the iPad being vertical) do that last and go as shallow in breaking seal as possible to not cut wires or f it and just order screen at same time. Plus u may Crack screen while fixing too so..3. Use a little dish to keep screws and parts in. There are only 2 sizes of screws and no need to keep track of what came from what it’s pretty basic. The big ones are LCD the rest go to board pieces.Oh! And do not use anything but dry fluffy micro fiber cloth to clean dust or gunk from lcd!! If ur not a techy u might use goo gone on it to get some glue gunk off…or something..so i heard…. 😕Good luck! 😀

Waste of money
Purchase this to replace the battery in my daughter’s iPad wasn’t even in for a week and it still is not working. She’s having to have a cord connected to her iPad just to be able to use it because the battery is junk.

Perfect fit and BONUS GLUE
Picked up 3 of these because as soon as I fixed my kids ipad EVERYONE in the office magically had a broken one too and I figured might as well swap batteries.Very long lasting battery. My old one would die constantly. It would say 100% then 80% then turn off. Then u plugged it in and it said 80% again. All in the span of 2 minutes so I knew I needed a new one.Installed in about a hour using a thermal heat to take the ipad apart and had decent charge on it.Make sure to fully charge before first use and do not let it drop to 0 for the first few times so the battery can calibrate correctly or else you might get stuck in a boot loop like I did where the tablet keeps restarting non stop.If this happens, put the device in recovery mode (look up for your particular model) and leave it charging for 30-45 mins then restart and you should be ok. It won’t charge on boot loop but will in recovery.The added tools were a great bonus and the extra glue is even better since I had to open the tablet back up because the home button broke off the replacement screen and I had to glue it on with B7000