2 Pack Upgraded to 4500mAh C3 Replacement for Craftsman 19.2V Battery Ni-MH Compatible with Craftsman 19.2V Battery 315.115410 315.11485 130279005 1323903 120235021 11375 11376 Cordless Power Tools

Batteries for my Craftsman drill and saw
The batteries worked perfectly. The charged up in the original charger and fit my Craftsman drill and saw just like the original ones. Very happy with them. Would buy them again.

Lets me avoid replacing tools
I have several C3 tools from around year 2000. The OEM batteries failed a long time ago and I replaced them with a different amazon seller’s nicd batteries in 2014. Those lasted about 10 years and physically fit and felt just like the OEM.These batteries seem to have come mostly charged as the charger shut off in a few minutes. They brought all the torque back to the drill which is still adequate to sink 3″ drywall screws without predrilling which is enough for my needs. The NiCd/NiMH seem to have longer shelf life than lithium for casual use.Compared to the previous batteries the fit is not as good. There is no assertive click from the latches, but the battery doesn’t pull off without activating the releases. Also when releasing the OEM and prior batteries would almost fall out from there own weight; these need a good pull to get out of the tool. Thus the latch mechanism seems jankier than OEM.I don’t know the runtime or life expectancy; so far only drove 24 different 3″ drywall screws into 2×4’s to build a box frame with 45 deg cross braces, and used the other battery to cut 2×4’s with the mini circular saw 3 times. They didn’t lose torque but its not much of a long term test.These batteries are sufficient to keep the old tools working, and avoiding lithium chemistry on new tools (where the “sit on the shelf” life with 6 month recharges is only about 3 years).I will update if they fail much before ~5 years as the last set lasted 10 years.

Gave new life to my old Craftsman power tools!
I was debating on getting a new set of power tools, since I was still using my old craftsman 19.2 volt set from the early 2000s. I hated to trash them, because they’ve been so good to me for all this time, but I was down to my last working battery. Luckily, I stumbled across these! Who knew they were making new replacement batteries for my beloved old craftsman tools! Now they run like new! I just rebuilt my entire deck thanks to these bad boys! Can’t say enough good things, I believe they hold a hotter charge than even the factory new ones did. Two giant 👍 👍

Does it fit
The product seems to be the same as the factory batteries, which are no longer available. They seem to work just fine, although I haven’t used them enough to determine longevity.

SUPER livraison et batteries de bonne qualité!!!

La entrega muy rápida sólo k al conectarlo a mi taladro de 18 v k me habían dicho k era compatible… Si lo pones en alta velocidad te lo empieza a quemar ..Si bajas la velocidad trabaja sin probemas…ojala y no se queme